The flat at 161A Sunny Gardens Road already occupied the first floor and loft, but the roof shape limited how comfortably the upper bedroom could be arranged. Detailed Planning’s proposal uses a hip-to-gable extension and rear dormer to make that existing loft accommodation more useful, with a generous bedroom, an en-suite bathroom and a better connection to the rear outlook.
Barnet Council granted full planning permission on 10 August 2026, under application 26/2237/FUL. The approved scheme also includes a Juliet balcony, two additional front-facing rooflights and a new side gable window.
More usable room within the roof
Changing the hipped side of the roof to a gable increases the space available along that edge. The rear dormer then provides a larger area with usable headroom across the bedroom. Together, these changes allow the bed, circulation and bathroom to be considered as one layout.
The en suite sits towards the front of the enlarged loft, with the bedroom opening out towards the rear. Space beside the front roof slope can accommodate a desk, giving the room another use beyond sleeping. The design develops the existing bedroom into a more comfortable suite, with its own bathroom and more useful space around the furniture.
For projects like this, loft conversion and roof extension design involves looking at where people can stand, move and place furniture, alongside the additional roof volume.
Daylight, outlook and the route upstairs
Double doors with a Juliet balustrade form the main opening in the rear dormer. Side windows allow ventilation without needing to open the doors, while the arrangement creates a broad outlook from the bedroom. The Juliet detail provides guarding at the opening rather than an external terrace.
Two additional rooflights introduce light through the front roof slope. The drawings also coordinate the stair with a raised loft floor level and use a rooflight above the stairs to help provide suitable headroom. These relationships matter: the route into a room needs as much attention as the room itself.
Developing the plan and section together is part of our architectural design process. Here, it helped bring the bedroom layout, en suite, stair and roof openings into the same proposal.
Fitting the roof extension into the street
The appearance of the semi-detached pair was an important part of the council’s assessment. The adjoining house at No. 159 already has a hip-to-gable extension, and Barnet considered that the proposal would rebalance the pair. The rear dormer is set in from the roof edges, and the approval requires external materials to match the existing building.
Privacy is also addressed through a specific condition. The side window facing No. 163 must be obscure-glazed and permanently fixed shut, apart from a fanlight opening. The permission also restricts additional side-facing windows and doors. These requirements form part of the approved design’s relationship with neighbouring homes.
A planning application for an existing flat
The property is a flat within a subdivided building, and this scheme was taken through a full planning application. Establishing the correct planning permission route was therefore part of the project from the outset.
The approval establishes the planning position for the proposed roof extension. Detailed stair construction, floor strengthening and other technical requirements remain matters for structural design and Building Regulations coordination; the planning decision does not confirm Building Control approval.
To explore how a roof extension could improve an existing flat or home in Barnet, book a call to discuss the space and its constraints.